Electrostatic separation
Electrostatic separation,use the differences of electrical of different material under the influence of high voltage electric field to achieve the purpose of separating.When the material particles enter into corona areas with the rotation roller, material under the electricity,centrifugal force and gravity function,add the different electrical properties of different material,different stress state make material of the falling trajectory is different,then separate out metal and nonmetallic mixtures.
Electrostatic separation is very suitable for powder material separation.
Application Scope:
Remove non-ferrous metal from plastic:
Aluminum and plastic separation (Such as aluminum-plastic panel,aluminum-plastic pipes,medicine sheet,aluminum-plastic package material,aluminum wire,aluminum-plastic shavings mixed waste etc all kinds of aluminum-plastic mixtures,separation purity can reach more than 95%).Copper-plastic separation (copper wire,crushed material scrap wire,separation purity can reach more than 99.7%).
Remove nonmetallic mineral from plastic(Sand particle,stone,Ceramics, glass, asbestos, kieselguhr, limestone, kaolin, clay mineral, etc mineral).
All kinds of metal from the waste circuit board, metal recovery rate can reach more than 99.5%.
Type |
Roller Length (mm) |
High Pressure (KV) |
Rotate Sped (rm/min) |
Power (kw) |
Capacity (kg) |
Dimension (m) |
JD-1000 |
1000 |
0~60 |
0~500 |
4 |
100-150 |
1.38X1.75X3.5 |
JD-1500 |
1500 |
0~80 |
0~500 |
4.5 |
150-200 |
1.38X2.3X3.5 |
JD-1800 |
1800 |
0~80 |
0~500 |
4.5 |
200-300 |
1.38X2.65X3.5 |
JD-1000-2 |
1000*2 |
0~90 |
0~500 |
5.2 |
250-350 |
1.38X1.75X3.9 |
JD-1500-2 |
1500*2 |
0~90 |
0~500 |
5.2 |
350-450 |
1.38X2.3X3.9 |
JD-1800-2 |
1800*2 |
0~100 |
0~500 |
6 |
400-500 |
1.38X2.65X3.9 |